Shandong Weikeda Machinery Manufacturing Co., Ltd.

+86 13206324332    

+86 18363207772   


Welcome to the official website of Shandong Weikeda Machinery Manufacturing Co., Ltd.

News Center
  • How to improve the work efficiency of the bending machine

     

    How to improve the efficiency of the hydraulic sheet metal bending machine in the bending process? Before using the hydraulic sheet metal bending machine to bend the material, various data needs to be adjusted, including the bending force, the distance of the back gauge, and the slider The adjustment of the upper limit, the speed of the slider and the gap between the upper and lower molds, etc., make it meet the actual operation requirements. How to calculate the bending force of the bending mac

  • The development of CNC bending machine system

     

    Where is the development of the CNC bending machine system reflected? The bending machine is a machine that can bend thin plates. Its structure mainly includes a bracket, a workbench and a clamping plate. The workbench is placed on the support, and the workbench is formed by the base. The base is connected with a clamping plate through a hinge. The base is composed of a seat shell, a coil and a cover plate. The coil is placed in the recess of the seat shell, and the top of the recess is covered

  • The correct method of operating the The correct method of operating the shearing machine

     

    1. Before work, carefully check whether all parts of the shearing machine are normal, whether the electrical equipment is intact, and whether the lubrication system is unblocked; clean the table and its surroundings with tools, measuring tools and other debris and corner waste.  2. Do not operate the shearing machine by one person. Two to three people should coordinate the feeding, control dimensional accuracy and reclaiming, etc., and be sure to have a unified command

  • How to repair the cylinder of CNC bending machine

     

    The hydraulic cylinder of the hydraulic bending machine is mainly a hydraulic actuator that converts hydraulic energy into mechanical energy, and then performs linear or reciprocating motion. Cylinders are the main components of hydraulic cylinders, single pillars for mines, hydraulic supports, gun barrels and other products. The quality of their processing directly affects the life and reliability of the entire product. The cylinder barrel has high processing requirements, and its inner surface

  • Maintenance of hydraulic parts of CNC bending machine

     

    Regular maintenance should be performed on the relevant hydraulic components of the hydraulic bending machine 1. After using the newly purchased hydraulic bending machine for one month, check whether there is any deformation in the bends of the oil pipes. If there is any abnormality, they should be replaced. After two months of use, all fittings should be tightened. When doing this work It should be shut down and the system has no pressure. 2. The hydraulic bending machine cleans the hydrauli

  • How to achieve synchronization of electro-hydraulic CNC double-machine linkage bending machine

     

    Features of electro-hydraulic synchronous CNC bending machine: 1. The electro-hydraulic servo system is used to control the two-cylinder synchronization, and the high-precision grating ruler is used to form a fully closed-loop control. The synchronization control has high precision, and the bending precision and repeat positioning precision reach a very high level. 2. The CNC cylinder deflection automatic compensation system overcomes the influence of the deformation of the slider during the

  • Advantages of CNC shears

     

    The shearing machine has a wide range of uses and powerful functions. It is used in many heavy industry industries. It cuts sheets of many industries. It is very practical and numerically controlled. Today, let's take a look at what aspects of its numerical control are embodied?1、 Shearing machine system structure 1. Integration It adopts highly integrated CPU, RISC chip, large-scale programmable integrated circuit, and application-specific integrated circuit chip. Its structure mainly in

  • CNC bending machine adjusting die

     

    Although there is no need to waste a lot of effort during the bending operation of the thin plate, the accuracy of the plate processing is very important in the process of this processing operation, and it is easier to cause errors through manual operation. Some plates Nor can it reach the standard bending angle, which will have a great impact on the production work. Therefore, professional instruments and equipment should be used to complete the processing when performing sheet bending operatio

  • How to better use CNC plate shears

     

    1. The CNC plate shears shall inspect whether the V-belt, handle, knob and key are damaged on schedule. If the wear (a basic type of parts failure) is severe, it shall be replaced in time and reported to the spare parts for supplement.2. The CNC shearing machine adopts a motorized rear retaining device and an electronic counter to facilitate the adjustment of the rear retaining position. The mobile blade support and four edge long blade can easily adjust the average clearance of the blade, impro

  • Precautions for using plate shears.

     

    1、 Working principle of plate shears After shearing, the plate shear shall be able to ensure the straightness and parallelism of the shearing surface of the plate to be sheared, and minimize the plate distortion, so as to obtain high-quality workpieces. The upper blade of the plate shearing machine is fixed on the tool holder, and the lower blade is fixed on the workbench. A supporting ball is installed on the worktable so that the plate will not be scratched when sliding on it. The rear stop

  • How to use the shearing machine?

     

    Usage of plate shears Adjust the clearance of the blade according to the thickness of the sheared material; Adjust the profiling or fixture according to the width of the sheared material; Make 1-3 empty strokes before the operation of the plate shear, and the shearing can be carried out only after it is normal. In case of abnormal operation of the machine during use, immediately cut off the power supply and stop the machine for inspection. When adjusting the machine tool, the power supply must

  • How to maintain the bending machine

     

    With the development of bending machine in recent years, various systems have appeared on the market. So how to choose a wide range of systems? In fact, it's much easier to follow the following estimates. First: the system must be simple to operate. We use CNC bending machine in order to bring us convenience and create more value for us. If the system design is complex and the operation is cumbersome, then no matter how excellent the system is, it may not be suitable for us. Just imagine tha

  • How to deal with the noise of plate shears

     

    Plate shears are easy to encounter four common faults of multi defecation frequency equipment and often make some noise. This common fault is usually caused by the gap between the equipment and the sliding rail slider. The trend of large-scale hydraulic equipment. The development of contemporary outstanding technology has changed from the development trend of traditional manual labor to today's practical automatic type. Relativity in gear transmission, the technical development trend of hy

  • Adjustment of press brake tool

     

    1. Installation adjustmentWhen installing the bending machine mold, be sure to check the state of the equipment, and then install and debug according to the steps. Pay attention to personal safety during debugging.2. Machine adjustmentWhen installing the bending machine mold, first understand the machine performance, open the bending machine, patiently adjust and check to see if the machine has previously used dust, iron debris, etc. Prevent unnecessary trouble for later use.3. Adjustment of sli

  • Press Brake Tool

     

    Bending machine mold is a tool used by bending machine to form and process sheet metal. This tool is composed of various parts, and different molds are composed of different parts. It mainly realizes the processing of article shape by changing the physical state of the formed material. A tool used to make a blank into a workpiece with a specific shape and size under the action of the pressure of the bending machine.1、 Structure Bending machine dies are divided into upper die and lower die of b

  • How to choose bending machine?

     

    Let's talk about ordinary bending machine, that is, non NC bending machine, which is usually called ordinary bending machine. General machine tool manufacturers can produce all kinds of CNC bending machines, but whether the ordinary machine is good or not can best represent whether an enterprise has ingenuity.1. Enterprise scale, which directly affects after-sales, you can't expect a small enterprise with only a dozen employees to bring you immediate after-sales. A formal Enterprise and

  • Application of robot in bending machine

     

    In the past, the automobile industry has always been the main field of robot application. With the improvement of automation demand, the application of industrial robots has been expanded. In addition to the traditional welding application, robots have also been widely used in machine tool loading and unloading, material handling and palletizing, grinding, spraying, assembly and other fields. Metal forming machine tool is an important part of machine tools, forming processing is usually associat

  • Brief introduction of plate shears

     

    Plate shears is a machine that uses one blade to cut the plate in a reciprocating linear motion relative to the other blade. By means of moving upper blade and fixed lower blade, reasonable blade clearance is adopted to apply shear force to metal plates of various thickness, so that the plates are broken and separated according to the required size. Plate shears belong to a kind of forging machinery, the main role is the metal processing industry. The products are widely used in aviation, light

  • Installation and debugging method of die for 100t CNC bending machine?

     

    The mold of 100t CNC hydraulic bending machine is composed of many parts, so special attention should be paid to the installation, and repeated debugging should be carried out when it is completed. Generally, when we install and adjust the bending machine mold, it will be divided into five parts to complete.1. Before the installation of the machine, the performance of the machine should be adjusted first. This process must be carried out patiently and seriously. Check whether the machine has dus

  • What are the differences between electro-hydraulic servo synchronous CNC bending machine and torsion shaft synchronous CNC bending machine?

     

    With the advent of industry 4.0 and the trend of intelligent development, the mechanical industry has been impacted to a certain extent. The use of computer integration technology in the manufacturing of CNC bending machine is an important mode of mechanical manufacturing in the 21st century. At the same time, with the aging and elimination of the old torsion shaft bending machine, how to recommend new electro-hydraulic synchronous bending parts to customers is one of our required skills, From t

Wechat

Mobile station

Bottom navigation

Product Series

Contact us


Phone: +86 13206324332 +86 18363207772


Email: weikedajx@126.com


Address: No. 8, Jiefang South Road, Liuyuan Town, Yicheng, Zaozhuang City, Shandong Province China


Website: http://en.weikedajx.com




seo seo