How to maintain the bending machine

        With the development of bending machine in recent years, various systems have appeared on the market. So how to choose a wide range of systems? In fact, it's much easier to follow the following estimates. First: the system must be simple to operate. We use CNC bending machine in order to bring us convenience and create more value for us. If the system design is complex and the operation is cumbersome, then no matter how excellent the system is, it may not be suitable for us. Just imagine that the system operation of our employees is a problem. Can it still give full play to the efficiency and accuracy of the system? Therefore, an excellent CNC system must be simple to operate, easy to learn and easy to choose.

Second: the system must be stable

  it's obvious that the system is stable. As we all know, we don't want the machine to go wrong just a few days after buying, which will affect our mood and delay production. So how do we know that the system is stable?

   1. We need to look at his years of existence in the market, reputation and ownership, and whether the product is mature or not. If a product has not been tested and affirmed by the market, the system will not be mature, and there will be such small problems.

   2. We need to look at the system manufacturer. The system produced by senior automation manufacturers will be more stable. In fact, the essence of CNC machine tools is mechanical automation. Most college students can develop them, but few can be successfully applied. Why? In fact, the ideal environment is far from the actual environment. Without a core technical team, it is impossible to develop a satisfactory system.

Third: see whether the manufacturer's after-sales service is timely.

   Pay attention to the maintenance after the bending machine is used up. The following precautions:

When using the bending machine, we should pay attention to cleaning and wiping the bending machine. Before wiping the bending machine, we must power off the bending machine. If we clean the bending machine without power off, it will harm not only the bending machine, but also our own personal safety.

   After wiping the bending machine, we should check the oil level in the oil tank of the bending machine. Once the oil level is too low, we should refuel the bending machine in time to prevent damage to the bending machine due to the depletion of oil in the oil tank. After adding oil, we should clean the filter screen of the oil tank of the bending machine. Once sundries enter the oil tank, it will also cause varying degrees of damage to the bending machine.

   If we encounter some problems that we can't solve by ourselves in use, we must ask after-sales help for maintenance, not by ourselves.