Shandong Weikeda Machinery Manufacturing Co., Ltd.

1. The CNC plate shears shall inspect whether the V-belt, handle, knob and key are damaged on schedule. If the wear (a basic type of parts failure) is severe, it shall be replaced in time and reported to the spare parts for supplement.

2. The CNC shearing machine adopts a motorized rear retaining device and an electronic counter to facilitate the adjustment of the rear retaining position. The mobile blade support and four edge long blade can easily adjust the average clearance of the blade, improve the shear quality and increase the service time of the blade. The three-point support shaft movable slide rail is adopted, the upper tool holder moves without clearance between the movable guide rails, and the service time of the blade can be adjusted by rolling the hand wheel. Before each startup, add lubricating oil regularly, at fixed points and quantitatively according to the requirements of lubrication chart. The oil shall be clean and free of precipitation

3. The CNC shearing machine is operated in strict accordance with the operating procedures. The electric shearing machine adopts the form of resistance key, clutch structure and open gear transmission, and adopts more advanced electrical appliances (foot switch and manual switch) for operation, with low noise and convenient operation and maintenance. All steel welding structure is adopted, which has the advantages of simple structure, simple operation, beautiful appearance and low energy consumption. It is widely used in metallurgy, light industry, machinery, hardware, motor, electrical appliances, automobile maintenance, hardware manufacturing and other sheet metal processing industries.

4. The machine tool must always be kept clean and unpainted with anti rust grease.

The series oil cylinder synchronization system is adopted, and the force of the machine tool is average. By adjusting the flow of the series oil cylinder (unit: cubic meter per second), the shear angle can be easily adjusted to meet the needs of different shear plate thicknesses. In the production of hydraulic punch, the stamping process has the advantages of saving materials and energy, high efficiency, low technical requirements for operators and making products that can not be achieved by machining through various die applications, so it is used more and more widely.

5. The CNC shearing machine shall be lubricated and scrubbed 10 minutes before work every day.